Professional Tool Reviews for Pros
The Dewalt DW735 Planer is a real workhorse. With any planer, one hopes for a powerful, accurate machine. This machine delivers on both accounts, but it doesn't come cheaply.
Lately, we’ve been working on quite a few custom woodworking projects including pieces such as desks, credenzas, dining tables, even a couple of custom mahogany gates. Each of these pieces requires the use of various hardwoods. In the past, we’ve had our lumber milled and planed at the lumber yard, mostly because our small benchtop planer in the shop wasn’t quite up to handling a large amount of hardwood. However, as we’ve picked up more custom work, it became clear that having a decent planer would help save time and money, so it was time to upgrade. We decided that the DeWalt DW735 13-inch, 2-speed planer would fill the gap between our smaller underpowered planer and a large industrial planer.
Upon first receiving the DeWalt DW735 Planer we noticed that not only was the box pretty large, it was also heavy. But that was to be expected. Most benchtop planers have some heft to them, however, the DW735 weighs in at 92 pounds. That realization prompted us to quickly build a rolling base for the planer to stand on.
The overwhelming feeling when opening the box was that the DeWalt DW735 is already a large step up from our previous planer based on build quality alone. The machine sits on a cast aluminum base, and although the casing is molded plastic, it’s solid. Overall, the DeWalt DW735 seems to jump across the line into the professional realm from a small-scale standpoint
One of the unique features the DeWalt DW735 Planer has is two feed speeds – one meant for quick thickness planing and the other for detailed finishing. Speed 1 slows the automatic feed, allowing the blades to cut the workpiece 179 times per inch which leaves a nice smooth finish. Speed 2 increases the automatic feed speed, lowering the number of cuts per inch to only 96, but makes dimensioning lumber quicker.
Upon first setting up the planer, we questioned whether we would need to use the finishing speed very often. However, we found ourselves using it quite a bit more than we initially anticipated. If nothing else, we use it on the last pass of each board we run through the planer because the smooth finish allows for a lot less sanding time.
It’s worth nothing that you have to have the unit on when you’re changing speed in order for it to effectively change gears.
One thing that DeWalt has done with the DW735 is add a built in blower for clearing wood shavings from the blades. It has a surprising amount air flow, and if used without some type of dust collector, it will shoot wood shavings everywhere. It does a wonderful job at keeping dust and shavings from building up on the blades, thus lengthening their life. We were able to hook our shop dust collection up to the planer (a 4-inch connection is recommended) and it’s been working great.
Occasionally we’ll have the need to plane several boards to the same thickness. In most cases, the rough cut lumber we receive from the lumber yard varies in size. This is where the depth setting dial comes in really handy. The depth setting dial has several incremental depth stops at standard measurements from 1/8th of an inch to 1-1/4 inches. This feature was a major help when we needed to plane several reclaimed oak boards for a desktop down to 1-1/4 thick.
The DeWalt DW735 comes with a handy Allen wrench that you use for loosening the screws for the plastic cover of the cutter head and the blades themselves. The reason we highlight blade changing on this model as a favorite feature is that it’s quite easy, especially considering the ample room inside the cutter head once the cover is removed. Also, we thought it was kind of cool that the Allen wrench includes a couple of magnets on the handle for easy removal of the blades.
The DeWalt DW73513-inch thickness planer is fairly easy to use and is pretty well self-explanatory for anyone that uses a planer. The real tests for this machine are the power and accuracy. Power is one of our main concerns with a new planer considering the number of times we trip the breaker on our old model either from overloading the motor or thermal shutdown.
We ran several different species of hardwoods through including ash, reclaimed oak, and mahogany. The planer worked remarkably well and at 15 amps, it had plenty of power to pull through and plane each hardwood without any hesitation. We planed nearly 70ft of 2-inch mahogany to 1-1/2 inch without overloading the system at all.
Accuracy is probably the most important aspect of thickness planing. After all, if the board doesn’t end up flat, what’s the point of using a planer at all?
The DW735 comes honed-in out of the box. It’s very easy to make small depth changes because of the oversize hand wheel. Each full revolution of the wheel changes the depth of the cut by 1/16th of an inch, which enables the user to easily make depth changes to even a 1/64th of an inch with a quarter turn.
Because the cutter head sits on four threaded posts – which reduces movement of the cutter head – there is very little snipe with this model. With the three-blade cutter head spinning at 10,000 RPM, the cut comes out very smooth even at the faster dimensioning speed. At the lower finishing speed, the material has a finish that is almost smooth enough to skip sanding.
The DeWalt DW735 13-inch thickness planer is a real workhorse. With any planer, one hopes for a powerful, accurate machine. This machine delivers on both accounts. At 92lbs, we’re not sure we would lug it around to a project site, but it’s a welcome addition in the shop.
After running 3 projects worth of lumber through this planer, we’re impressed. The DeWalt DW735 is a perfect upgrade from the lower powered benchtop planer, and very effectively bridges the gap to professional shop machinery. We’re not quite ready to open a mill workshop, but this planer does everything that we’ve asked of it and has performed admirably.
As with many upgrades, this one doesn’t come cheap. You’ll be shelling out $629 to make this one happen. Once you do, be warned – you won’t go back to a lesser model again.
The son of a journeyman carpenter, Matt Kent has taken to the trade himself, which has been somewhat of a homecoming. Spending the majority of his adult life as an accomplished photographer, Matt now owns and operates Kent Made LLC with his father, Richard. Specializing in custom stair installations and fine trim carpentry, Matt spends most of his time either in front of a saw blade or behind a finish nail gun. And, oh how sweet it is.
DeWalt announced the arrival of their Elite Series of tool accessories. Designed for strength and durability, the lineup will include the likes of includes saw blades, hole saws, diamond masonry cutting blades, abrasives, and masonry drilling accessories. Select items in this lineup are also made in the USA with global materials. Look for these accessories now […]
The DeWalt DCN623 Brings a Compact 20V Pin Nailer for Cordless Carpentry Work Cordless battery-powered nailers have steadily encroached on their corded counterparts with lighter designs and on-par performance. With smaller finish nailers, battery power brings lots of weight. Our question is whether the DeWalt DCN623 20V Max cordless pin nailer can present a compact-enough […]
DeWalt Cordless Ratchets Bring New Options for Mechanics DeWalt Cordless Ratchets come in various degrees sizes and they have models that operate on either the 12V Xtreme or 20V Atomic platform. DeWalt’s new cordless ratchets join products from other manufacturers who have released similar automotive tools. Will these new DeWalt Atomic 20V ratchets and 12V […]
Ox Tools Pro Tuff Blade Tape Measure Targets Premium Competitors Tape measures are a staple in everyone’s toolbox from the most seasoned Pro to the greenest DIYer and range in both price and length. But are all tape measures created equally? Certainly not. The OX Tools Pro Tuff Blade tape measure targets the premium end […]
Regarding the Dewalt DW 735 surface planer: I am incredibly displeased with the blades. They dull after just a few passes with hardwoods, leaving ridges and scratch marks. This occurs despite turning the handle only a quarter of a turn to lower the blades. It’s a rip off to be forced to change a $50 set of blades so often. Dewalt needs to either make better quality blades or dramatically reduce the price of these.
As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.
See our Privacy Policy and Terms & Conditions.
Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.
There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!
Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.
Professional Tool Reviews for Pros