We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
In an article recently published in the journal Additive Manufacturing, researchers discussed the parametric optimization of the two-photon direct laser writing technique for the production of polymeric microneedles.
Study: Parametric optimization of two-photon direct laser writing process for manufacturing polymeric microneedles . Image Credit: AlteredR/Shutterstock.com
Despite the widespread use of the hypodermic needle for blood samples and analysis, there are still limitations to its utilization. Miniaturized and more complex biomedical devices capable of delivering therapeutic medications and providing primary data on patient health are very much required. Small compounds, macromolecules, micro, and nanoparticles have all been delivered using microneedle arrays.
Combining microneedle medicine administration and bio sampling with complimentary patches or a single patch that performs both activities would be ideal. Developing vaccinations that are stable at room temperature might save a lot of money by eliminating the need for the cold chain entirely.
Microneedles are made from a number of materials, including metals, glass, silicon, ceramics, and natural and synthetic polymers, in a variety of shapes. Polymeric microneedles have attracted a lot of attention because of their biocompatibility, ease of manufacture, and mechanical stability. Rapid printing of nano- and micro-sized structures with feature sizes as tiny as 100 nm is possible with two-photon direct laser writing. Interest in polymer microneedle microprinting has grown in recent years, as has the number of academic articles published on the subject. However, rather than optimizing the printing process, most researchers have focused on the uses of microneedles created using this technique.
In this study, the authors described how to make highly detailed microneedles with side channels and other complex designs using the two-photon direct laser writing process, as well as how to optimize and choose parameters for the microprinting of tall microneedles with side channels and other complex designs. The soft embossing method was used to demonstrate the master microneedle's reproduction capabilities. The mechanical properties and insertion force of the microneedle replicas were also studied.
The team demonstrated the printing of high-resolution microneedles and presented an in-depth investigation of the parameters affecting structure microprinting and optimization of the 3D laser lithography process for the production of microneedles by utilizing the commercial photonic professional GT system. For different prints, the laser power employed by the system varied from 80 mW to 100 mW, and the results were monitored.
After a series of optimization trials, laser power of 80 mW, a writing speed of 50,000 µm/s, and minimum and maximum slicing distances of 0.5 µm and 0.7 µm were chosen for printing microneedles with an acceptable level of polymerization.
The researchers developed rapid replication molding technologies based on polydimethylsiloxane (PDMS) molding and embossing procedures. The relationship between two-photon direct laser printing process factors such as scanning modes, laser power, hatching, scan speed, stitching, and slicing distance was described.
A microneedle array with a tip height of 300 µm had the lowest tolerance to the applied stress, but a microneedle array with a tip height of 150 µm could withstand an applied load 50% higher before failing.
The kinetics of the polymerization process in the focus voxel, which determined the polymerization degree of the printed components, was affected by the process parameters. The scan speed and laser power during the process had a substantial impact on the degree of polymerization. The results revealed that the faster the scanning speed, the less complete the polymerization was. The two-photon polymerization (TPP) revolutionized 3D printing by facilitating the printing of sub-micrometer feature sizes. The small voxel size made printing of the higher volume structures consume more time than other 3D printing processes like stereolithography, and the technology was better suited for prototyping.
Demolding of embossed cycloolefin polymer (COP) polymer microstructures was achieved without deformation or breakage of the embossed microstructures because of the flexibility of PDMS molds. Soft embossing of replica polymer microneedles provided minimal tooling and process setup costs, as well as inexpensive material and capital equipment costs, which indicated large-scale manufacturing possibilities. Porcine cadaver skin tests revealed the capacity of thermoplastic microneedles to penetrate the animal skin. Thermoplastic materials had no cytotoxicity or inflammatory effects.
In conclusion, this study elucidated the development of microneedles with optimal geometric accuracy and exceptional tip sharpness by using the two-photon direct laser writing technology. Feature geometries and resolution were accurately derived from computer-aided design (CAD) data rather than being constrained by the physics of traditional micro-manufacturing techniques.
The microneedle's side-open channel design generated a microfluidic channel that crossed the epidermis and communicated with the subcutaneous region, allowing for medication delivery or biomarker monitoring. The cross-sectional area accessible for molecular transport across the skin was increased by microneedle arrays. The TTP process was optimized to allow for the optimization of a large number of parameters in order to produce the most detailed features in a reasonable time, which is ideal for large-scale production operations.
The authors believe that the discussed concept is critical for grasping the fundamentals of 3D laser lithography and fabricating sophisticated microneedles with the best resolution. They also mentioned that this advanced manufacturing technology could be used to microprint a range of high-resolution, complex microstructures, not simply microneedles, by describing the process' main characteristics and features.
More from AZoM: How are PAT Techniques Used for Real-Time Particle Analysis?
Rad, Z. F., Prewet, P. D., Davies, G. J., et al. Parametric optimization of two-photon direct laser writing process for manufacturing polymeric microneedles. Additive Manufacturing 102953 (2022). https://doi.org/10.1016/j.addma.2022.102953.
https://www.sciencedirect.com/science/article/abs/pii/S2214860422003475
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Surbhi Jain is a freelance Technical writer based in Delhi, India. She holds a Ph.D. in Physics from the University of Delhi and has participated in several scientific, cultural, and sports events. Her academic background is in Material Science research with a specialization in the development of optical devices and sensors. She has extensive experience in content writing, editing, experimental data analysis, and project management and has published 7 research papers in Scopus-indexed journals and filed 2 Indian patents based on her research work. She is passionate about reading, writing, research, and technology, and enjoys cooking, acting, gardening, and sports.
Please use one of the following formats to cite this article in your essay, paper or report:
Jain, Surbhi. (2022, June 09). How to 3D Print Polymer Microneedles. AZoM. Retrieved on August 26, 2022 from https://www.azom.com/news.aspx?newsID=59297.
Jain, Surbhi. "How to 3D Print Polymer Microneedles". AZoM. 26 August 2022. <https://www.azom.com/news.aspx?newsID=59297>.
Jain, Surbhi. "How to 3D Print Polymer Microneedles". AZoM. https://www.azom.com/news.aspx?newsID=59297. (accessed August 26, 2022).
Jain, Surbhi. 2022. How to 3D Print Polymer Microneedles. AZoM, viewed 26 August 2022, https://www.azom.com/news.aspx?newsID=59297.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
This product profile describes the Flex Raman Catalog.
This is the full list of rotary evaporators offered by IKA Werke.
This product from Alicona features Cobots, which consist of a collaborative 6-axis robot and optical 3D measuring sensors to provide user-friendly measurement automation.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022